Accounting of Sun Radiation in Heat Transfer in COMSOL

Accounting Sun Radiation with Location Only

Abstract

Knowing the sun’s radiation and thermal effects is very important to designers within the building industry, especially in designing “green” buildings. Heat transfer also plays a vital role in designing outdoor devices in terms of maintaining temperatures in extreme hot or cold environments. To use the words of Nicolas Huc, project leader for the Heat Transfer Module development at COMSOL in France: “it makes a huge difference if you forget to take the sun’s radiation into account.”

* Analyzing Solar Radiation

As of version 4.3 of the COMSOL Multiphysics® software and add-on Heat Transfer Module, external radiation sources can be defined in 3D for all physics user interfaces via the Solar Position option. You can easily define the direction and intensity of the sun’s incident radiation based on the latitude and longitude position on Earth, the date, and the time with this new option (The solar position is only based on the position on Earth, not any other planet or the moon, but it is fine for airplanes and might work for a satellite orbiting close to Earth).


Defining an external radiation source using the Solar Position option.

The refractive index parameter has also been implemented to enable modeling of radiation through glass, water, and other media with a refractive index different than 1.0. Additionally, radiative heat transfer between thin structures is now possible when surface-to-surface radiation is used together with the Thin Conductive Shell user interface. This is great news for those involved in heat transfer projects.

So long, dense meshes! Thin walls can now be represented as interior boundaries instead of having to define a solid domain with a wall boundary condition on both sides. A wall condition can be defined between two fluid domains with the Interior Wall boundary condition, which is available in the Conjugate Heat Transfer and Non-isothermal Flow interfaces. To read about more updates to the Heat Transfer Module, check out the 4.3 Release Highlights page.

* Example: Analyzing Thermal Bridges with Heat Transfer Simulation

As an example, take a look at the following model, which represents part of a building, displaying its walls, floor, and a balcony (to the left). As you can see, the balcony creates a thermal bridge.


Analyzing heat transfer in a two-floor structure with a thermal bridge.

In Fanny Griesmer conversation with Nicolas, he mentioned in passing that our software had been submitted for a benchmark some time ago for version 3.5, and COMSOL Multiphysics was the only “general-purpose software” to pass the standard EN ISO 10211 for simulations of thermal bridges in buildings. Pretty neat.

Thanks for your time!


Source: COMSOL

Author: Fanny Griesmer

Acamech is a mechanical engineering center, specializing in design, analysis, and simulation of mechanical engineering problems with focus on Conceptual Design. With modern and up-to-dated tools, we offer you flexible solutions. Acamech is a safe and trusted partner for your current and future needs.

    6 Comments

  1. John
    April 6, 2019
    Reply

    Helpful information. Fortunate me I found your site by chance, and I’m stunned why this twist of fate didn’t happened in advance!
    I bookmarked it.

  2. new sky777
    April 7, 2019
    Reply

    Its a very useful text.

  3. situs judi bola
    April 10, 2019
    Reply

    I am not positive where you are getting your info, however great topic.
    I needs to spend a whiⅼe studying much more or working out more.
    Thank you for gгeat information I used to be
    searching for this info for my mission.

  4. Trudy Lehman
    April 10, 2019
    Reply

    Great info. Lucky me I found your site by accident.
    I save as a favorite for later!

  5. Byron
    April 11, 2019
    Reply

    We are a group of Simulators and opening a new sⅽheme іn our projects. Your website offered us with valuable info to work оn. You have done an impressive job and our whoⅼe community
    will be grateful to you.

  6. Chang Brown
    April 11, 2019
    Reply

    Particular article, totally what I wanted to find.

Leave A Reply

Your email address will not be published. Required fields are marked *